Scroungers C.C. 1964 Falcon Drag Car

Page 17 of 19 Previous  1 ... 10 ... 1617, 18, 19  Next

View previous topic View next topic Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew on November 17th 2008, 8:55 pm

I fabbed up a set of front mounts to hold the engine. They will need to be taken off later, cleaned up and painted but the engine is now resting on it's own mounts. I'm heading back out now to play with the crossmember and tranny mount. Very Happy
If you don't like my dinged and dented hot rod sitting next to yours, put yours back on it's trailer and leave!

RebStew
Scroungers C.C.

Posts : 2948
Joined : 09 Oct 2007
Age : 19
Location : Newport Ky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by Lady rebel on November 18th 2008, 1:41 am

Steve said we need a seal for the windsheild. I'll put in the first $20. If anyone can help out please do. Even if it's $5. We don't have any funds for the gasser. Our club money is a seperate fund. Thanks, Amy
Sometimes you just need a cute smile to get you through the day!!

Lady rebel
Master restorer

Posts : 517
Joined : 09 Oct 2007
Age : 32
Location : Newport Ky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by big dogs 42 on November 18th 2008, 3:06 am

Put me down for a ten spot come on guys at least match me!!! You spend more than that at a fast food joint! Cool
HAVE YOU DRIVEN A FORD LATELEY ?

big dogs 42
Restorer

Posts : 466
Joined : 14 Dec 2007
Age : 54
Location : burlington kentucky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by falconwagon62 on November 18th 2008, 11:58 am

Hey guys,

I bought the , when they come in I'll give you a buzz....I also got me 4 of them....

John

falconwagon62
Floor sweep

Posts : 85
Joined : 07 Jun 2008
Age : 44
Location : Trenton, Ohio

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by FalconEddie1964 on November 18th 2008, 12:59 pm

big dogs 42 wrote: You spend more than that at a fast food joint! Cool


Ok, I'm good for $10 when ya see me. I don't know if I'll make it though, doing without the 10 Double Cheese Burgers for me and my girls (Madonna and the two dogs LOL) It would be nice to have a windshield in when I start driving it to and from work. The next collection should be for a radio and A/C.
Wash, Rinse, Repeat!

FalconEddie1964
Grease monkey

Posts : 207
Joined : 06 Feb 2008
Age : 29
Location : At the races, top row of the grandstand at about 1000 ft

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by big dogs 42 on November 18th 2008, 3:06 pm

You be ok Doug your like me you can live off the fat of the land as for the dogs give them a extra bowl of kibble and i know you got enough money to get Modanna a cheeseburger ! Smile Where are the rest of the Scroungers i can see you out there hideing behin you wallets and purses !!!
HAVE YOU DRIVEN A FORD LATELEY ?

big dogs 42
Restorer

Posts : 466
Joined : 14 Dec 2007
Age : 54
Location : burlington kentucky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew on November 18th 2008, 3:27 pm

falconwagon62 wrote:Hey guys,

I bought the , when they come in I'll give you a buzz....I also got me 4 of them....

John
Thanks John. I bought one already. Very Happy
If you don't like my dinged and dented hot rod sitting next to yours, put yours back on it's trailer and leave!

RebStew
Scroungers C.C.

Posts : 2948
Joined : 09 Oct 2007
Age : 19
Location : Newport Ky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew on November 18th 2008, 3:32 pm

I didn't get to the trans mount and cross member last night. I went ahead and grabbed a master to see if it fit. We are good on the master! I also stuck the radiator down in the bay to see where we are with it. 1" of clearance should work! It's not bolted in or anything but we have clearance.


If you don't like my dinged and dented hot rod sitting next to yours, put yours back on it's trailer and leave!

RebStew
Scroungers C.C.

Posts : 2948
Joined : 09 Oct 2007
Age : 19
Location : Newport Ky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew on November 18th 2008, 4:02 pm

I just talked to Dog. We are gonna work on the gasser tomorrow(Wensday) if anyone wants to stop down. Should be there late after 4pm.
If you don't like my dinged and dented hot rod sitting next to yours, put yours back on it's trailer and leave!

RebStew
Scroungers C.C.

Posts : 2948
Joined : 09 Oct 2007
Age : 19
Location : Newport Ky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by 6-71Kid on November 18th 2008, 4:50 pm

I'm in for 10. And I might try and make it down tomorrow.
“That journey to Rouen was a terrible embarrassment to Jesse and me, for on the long straights across France, that great bulbous Oldsmobile coupe with the trailer and racing car on the back sat behind us no matter what we did. We both rowed our little Porsches along as hard as we could, and the Miller entourage just sat there in our mirrors. When we stopped, Ak removed his cigar and asked, ‘Your little cars okay?’”

6-71Kid
Master mechanic

Posts : 448
Joined : 10 Oct 2007

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by FalconEddie1964 on November 18th 2008, 5:48 pm

Shouldn't take too many more $10 for a windshield seal. what, about 2 or three more?

Cole what time you going and coming back tomorrow? I might ride along if possible. I don't have to work Thursday and your young and don't need much sleep. We won't be able to stop for $1 burgers because I promised my alowance to the Machine.

Hey.........I got a "Monte Carlo Bar" for the front of a Falcon/Mustang. It's a brace for the upper suspension, of which you have none, but thought it might help stiffin the front end some. Puddin Head and/or Falcon John should know if it'll help. Also, it's CHROME! Should I bring it along if Cole picks me up?
Wash, Rinse, Repeat!

FalconEddie1964
Grease monkey

Posts : 207
Joined : 06 Feb 2008
Age : 29
Location : At the races, top row of the grandstand at about 1000 ft

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew on November 18th 2008, 9:12 pm

FalconEddie1964 wrote:Shouldn't take too many more $10 for a windshield seal. what, about 2 or three more?

Cole what time you going and coming back tomorrow? I might ride along if possible. I don't have to work Thursday and your young and don't need much sleep. We won't be able to stop for $1 burgers because I promised my alowance to the Machine.

Hey.........I got a "Monte Carlo Bar" for the front of a Falcon/Mustang. It's a brace for the upper suspension, of which you have none, but thought it might help stiffin the front end some. Puddin Head and/or Falcon John should know if it'll help. Also, it's CHROME! Should I bring it along if Cole picks me up?

Bring it with ya. I been trying to think of a way to help support the front of the frame. With the front spring eye on the end of the frame I'm sure there is preaser on it.
If you don't like my dinged and dented hot rod sitting next to yours, put yours back on it's trailer and leave!

RebStew
Scroungers C.C.

Posts : 2948
Joined : 09 Oct 2007
Age : 19
Location : Newport Ky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew on November 18th 2008, 9:22 pm

I bought this cool old 5" monster tach today. I figured it matched the era of the gasser pretty good. It's an old one but looks to be in super good shape.


Randy Vickers donated this old water temp gauge to the project. I'd like to find some old cups for gauges to mount them on the cowl or dash.
If you don't like my dinged and dented hot rod sitting next to yours, put yours back on it's trailer and leave!

RebStew
Scroungers C.C.

Posts : 2948
Joined : 09 Oct 2007
Age : 19
Location : Newport Ky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew on November 18th 2008, 10:01 pm

Anyone else coming tomorrow?
If you don't like my dinged and dented hot rod sitting next to yours, put yours back on it's trailer and leave!

RebStew
Scroungers C.C.

Posts : 2948
Joined : 09 Oct 2007
Age : 19
Location : Newport Ky

Back to top Go down

Re: Scroungers C.C. 1964 Falcon Drag Car

Post by RebStew on November 18th 2008, 11:03 pm

We have 50.00 so far for the windshield seal all we need is 10 more bucks. Anyone else willing to help out.
$50.00 for the seal and 10 to ship. I called Green Sales and they don't have one so it will have to be ordered.
For the ones that has offered to help please bring the cash with ya if you come tomorrow. If you don't have it yet it's okay just whenever ya can...
http://cgi.ebay.com/ebaymotors/60-65-FORD-FALCON-RANCHERO-WINDSHIELD-SEAL-NEW_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem310101812823QQitemZ310101812823QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
If you don't like my dinged and dented hot rod sitting next to yours, put yours back on it's trailer and leave!

RebStew
Scroungers C.C.

Posts : 2948
Joined : 09 Oct 2007
Age : 19
Location : Newport Ky

Back to top Go down

Page 17 of 19 Previous  1 ... 10 ... 1617, 18, 19  Next

View previous topic View next topic Back to top


Permissions of this forum:
You cannot reply to topics in this forum