{ Scaring babies and little old ladies with open headers since 1964 }
Welcome to the Scroungers Car Club web site.
It cost nothing to register Sign up and speak up!

Sorry for the wall. This keeps our web site clean of SPAM and other unwanted parties so the true gear heads can enjoy him/her self.
You must register to see most of this forum. Register or if you have already registered just log in to see what's going on.

Our books are open. If you are interested in joining or opening a chapter of the club in your state contact us. Scroungers_CC@Yahoo.com


Need Sheet metal lead

{ Scaring babies and little old ladies with open headers since 1964 } :: BENCH RACING :: Shooting the breeze

View previous topic View next topic Go down

Need Sheet metal lead

Post by jdporter221 on July 18th 2010, 6:56 am

Anyone know a place to purchase a sheet of 20 gage sheet metal. Boone steel says they sell it but they will not sell small quantities.
Thanks
Jim Porter

jdporter221
new kid on the block

Number of posts: 7
Registration date: 2010-07-10
Age: 60
Location: Walton, KY

View user profile

Back to top Go down

Re: Need Sheet metal lead

Post by RebStew on July 18th 2010, 9:09 am

You can try Sears. They have a small selection. So does Lowes. The place I buy from, Levine only sell in 4X8 or 10 feet sections.

_________________
Most active car club in the tri state

Wanted: 1950 Buick bumper and grille.

RebStew
Scrounger's Pitbull On Nitrous

Number of posts: 12410
Registration date: 2007-10-08
Age: 83
Location: Newport Ky

View user profile

Back to top Go down

Re: Need Sheet metal lead

Post by Roller Coaster on July 19th 2010, 1:22 am

You might try Cincinnati Steel, that is where my father-in-law works.

Roller Coaster
Hot Rod Builder

Number of posts: 670
Registration date: 2009-01-18
Age: 34
Location: Butler, Kentucky

View user profile

Back to top Go down

Re: Need Sheet metal lead

Post by puddin head on July 20th 2010, 12:55 am

There's Metal Supermarket over in Tri-County that has anything you need and will cut to any size. 513-942-8222.

puddin head
Scrounger

Number of posts: 151
Registration date: 2008-05-14
Age: 60
Location: Mason, Ohio

View user profile

Back to top Go down

Re: Need Sheet metal lead

Post by falconwagon62 on July 20th 2010, 5:54 am

Ackermann steel, Marty 513 648 0880

In Tri county area by Northland Blvd.


JWH

falconwagon62
Scrounger

Number of posts: 1538
Registration date: 2008-06-07
Age: 47
Location: Trenton, Ohio

View user profile http://www.ovcfca.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

{ Scaring babies and little old ladies with open headers since 1964 } :: BENCH RACING :: Shooting the breeze

Permissions in this forum:
You cannot reply to topics in this forum