DJM 2" Drop Springs

Brand new, installed and drove approx. 3 miles. They make my truck too low combined with the drop spindles I have and also being that I cut one complete coil out to give an additional drop. Appox. drop total is close to 4". It is not recommended that these be used with drop spindles because you will be IMMOBILE. I am taking these out as soon as my others come in. It will no/cannot be driven until that point. $90 brand new, will let go for $60. And I still have the cut coils if you need proof of how much was taken.

My S-10 has DJM 2-inch drop spindles in combination with DJM 3-inch drop coils and I am running 15x6 with 195/60R15 without any clearance issues. What size rim and tire combination are you using on the front?

Yeah, I've seen those S-10's running pretty low around town. I don't think they've all got air ride. Welcome to the world of lowered vehicles. You lower them till they scrape then lower it another inch or so. Praise The Lowered!

2" spindles, 2" springs (one complete coil cut in addition, figuring another 3"+ just in the cut) with Weld skinnies on the front with 165's on them (good size tall tire). And out of curiosity, I put on my 15x7 195 60's and the skid plate sat on the ground and was TOTALLY immobile. I re-ordered 3" springs and those will be going on in place of the cut ones.